MB SD C4 PLUS FEEDBACKS & FAQS

Check what MB SD C4 Plus can do or cannot do from the customer feedbacks and frequently asked questions.

Here are some test reports about MB SD C4 PLUS can or cannot work:

W164 ML 6.3amg 2006 diagnosis- OK

2005 MB CLS 55 AMG diagnosis- OK

2012 W204 and 2014 W166 diagnosis- OK

Mercedes-Benz 2015 trucks mp4 diagnosis- OK

Mercedes GLA200 W156 2014 diagnosis- OK

Diagnose Mercedes-Benz GLS 2015-2019- OK

MB A Class W177automatic high beam activation- OK

Mercedes Benz GLC 2015 radio online programming- OK

Mercedes Benz CLA 35 shooting brake series X118 2020- OK

MB 2016 sprinter turn signals and high idles programming- OK

2006 Mercedes-Benz CLS500 W219 SBC brake and air calibration- OK

2012 S63 W221 recalibrates the ABC system, reduce the driving height and maintain the ABC system with flushing fluid- OK

2004-2015 Setra Buses S417 AS tronic ZF transmission disgnosis- OK

MB A Class W177 change unit of measure from l / 100km to km / l- NO

MB SD Connect C4 Plus FAQs:

Q: Does MB SD C4 PLUS support developer function?

A: Yes.

Q: Can MB SD C4 PLUS change the maximum speed limit on Mercedes-Benz?

A: Only use the old software and open the related function that can do for truck. But it cannot support car.

Q: Can I use mb sd c4 plus flash ECU and write VIN to ECU?

A: No, it doesn’t support flash the data. It can support the blank recognized ECU online programming.

Q: Is it possible to remove adblue from truck no need vedoc by mb sd c4 plus?

A: No.

Q: Can mb sd c4 plus work on Lenovo ThinkPad X200 Tablet?

A: As long as the Ram is 4G I5ECU above is ok.

Q: Can I use mb sd c4 plus work on the toughbook with 500gb SSD computer?

A: Yes.

Q: Does mb sd c4 plus support Panasonic CF-D1?

A: Yes.

Q: I received MB SD C4 Plus and v2020.03 software 500G HDD. But I found the HDD only has 256GB.

A: Please go to Disk Manager to check

Q: I want to diagnose 2003 UNIMOG 500 by MB SD C4 Plus, which software is good to work with?

A: V2020.03 (newest), V2019.12 and V2019.09 are ok.

Q: I used v2020.03 mb sd c4 plus to test S223, C206, E23. It always asked me to login with account and password. But when I diagnosed E213, Smart 413, A176, all of them can work normally.

A: It’s normal that the login prompt pops up when run the Xentry software. Just click Ignore. If you’re going to do an online feature, you’ll need an account and password.

Q: Will mb sd c4 plus support W205 gear box?

A: It should be not a problem.

Q: Can V2019.12 MB SD C4 Plus Benz diagnostic tool do MB light electronic module coding?

A: Yes.

Q: Is it possible to use v2020.03 mb sd c4 plus software on Mercedes Benz Xentry VCI C6?

A: Yes, but you need to replace the das file.

Q: Can v2020 MB SD C4 Plus diagnose 1995 Mercedes-Benz 218-D3 S320 W140?

A: The car year is too old, you can try it.

Q: Does DOIP SD C4 Plus support Mercedes actors and actros mp4?

A: Yes, support the old cars.

Q: Does MB SD C4 Plus support all the parts of w211 e55 diagnosis, test, and make rear o2s invalid?

A: No, it doesn’t.

Q: Can DOIP SD C4 Plus support diagnosis on 1989 Benz 190E to 2003 E55 AMG?

A: It can support the MB cars after year 1989, but if too old cannot sure.

Q: Can I use MB SD C4 Plus with V2020.03 Xentry software to do diagnosis on 2013 Smart ForTwo ED or 2009 Smart Fortwo Passion Cabriolet 2D?

A: In general, all the Benz cars are supported. Please give the chassis to check the detailed car model.

Q: Will DOIP SD C4 Plus diagnose all the Benz smart cars from 1998 till now?

A: Yes.

Q: Does MB SD C4 Plus support the function of refreshing the engine control module?

A: Yes.

Q: Will MB SD C4 PLUS do the functions as below?

-Adjust vehicle height: set the air suspension

-Replace brake oil bleed

– NOX O2 sensors and other real-time monitors before fault confirmation

A: Yes, all the functions above are supported.

Q: Does DOIP SD CD Plus support offline diagnosis?

A: Yes, the device supports. But the new software doesn’t have offline installer, so it cannot do offline programming while the old software can do that.

Q: The MB SD C4 plus has been connected to the vehicle (1997 Mercedes SL 500 model R129), and the IP address is correct as well. But the device prompts “device not in use”.


A: When the icon appears on the main unit, it means the device is locked.

To be continued…

V75 Nissan Consult 3 Consult III plus Diagnostic Tool with Lenovo T410 Laptop Ready To Use

The software have installed on Lenovo T410 Laptop,you can use it directly after you receive it.

1. Support both diagnostic and programming, while if you want to make key programming, still need to buy Security Card for Nissan Consult 3 Plus  for Nissan Consult 3 Plus

2. Support GT-R,if you need test GT-R，still need to buy Nissan consult-3 plus GTR Card

Top 5 Reasons to Get Nissan Consult 3 Plus:

1.Consult-3 plus = Consult-3 for Nissan + Consult-2 for Nissan
2.Software Version: CSP Software Version : CSP V41.10; Programming Data Version : plus_V75
3.Supports all the models of the Nissan and Infiniti from 1996 to 2018, with all Consult II & III functions .
4.Calcaulate the password for the new cars till year 2018 with NISSAN Password.
5.Supports ECU Programming without card
6.Can be installed on Windows XP, WIN7
7.Suppored Languages: English, Chinese, Finnish, French, German, Greek, Italian, Japanese, Portuguese,Russian, Spanish, Turkish, Thai, Czech, Polish, Hungarian

Nissan Consult3 Plus v75.20 software installation:

1.Uninstall the firewall, antivirus software.
2.Install the Consult 3 plus V75.20 to the C drive in the “NTFS” format.
3.Nissan Consult 3 Plus V65.12 & up adds ECU programming function without working with immobiliser card.
Operating system: Windows XP and Windows 7/8/10 operating system. Cannot work on VISTA O/S. ( Windows XP SP3,Windows 7 Pro/Ultimate  is also supported)

Consult -3 Plus for Nissan Functions :

Consult-3 Plus for Nissan can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .
And Consult III Plus can calcaulate the new 20 digital password for the Nissan new cars.

1. Consult-3 Plus for Nissan (Nissan Consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2018.
2. Consult-3 Plus for Nissan work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
3. Consult-3 Plus for Nissan support nissan car electrolic system diagnostic function.

4. Consult-3 Plus for Nissansupport nissan electromobiles such as Leaf.

Conslu-3 for Nissan Car List:
1. Scantool Diagnostics: for all Nissan,Infiniti,GTR;
2. Immobi and Smart key: for all Nissan,Infiniti,GTR;
3. Nissan GTR: for Nissan GTR Diagbostics,Immobi;
4. Electromobiles car: for Nissan Electromobiles car Diagbostics and Immobi

Second Hand Laptop Lenovo T410 Laptop Configuration：
Brand: Lenovo
Screen Size:14.0
Memory: 4GB
Memory (RAM): Intel(R)Core(TM)I5 CPU+
HDD：500GB
Type: Laptop/Notebook
Condition: Used
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
Primary Drive: DVD+/-RW Processor Speed: 2.53GHz
Processor Configuration: Dual Core
Consult-3 for Nissan Packing List:
1pc* Consult 3 Plus for Nissan Vehicle Communication Module + OBD16 Cable
1pc* 14Pin Line for Nissan
1pc* USB 2.0 Cable
1pc* Casebox
1pc* HDD 160G (option)

FAQ
Q1: What is the difference among Nissan consult 3, consult 4 and Nissan consult 3 plus? Can Nissan consult 4 remap ECU and change IGN time-limited parameter?
A1:
1) Nissan consult 3 and consult 4 share the same software version and parts, the difference between them is the appearance and the quality;
2) Nissan consult3 plus is the newest-released Nissan diagnostic  it supports the Nissan up to 2018 year. And only Nissan Consult 3 Plus can support programming.

Q2: What additional card needed when use Nissan Consult-3 plus to make key?
A2: It need additional card, it needs for making key, this card is Nissan Consult-3 plus Security Card, otherwise the button "Immobilizer key" is gray color and is unavailable

Q3: Can i use this nissan consult 3 plus to program tcm and bcm?
A2: Yes, but you need to have the program file.

Q4: Does your Nissan consult 3 plus contain Battery registration card?
A6: No, it doesn't.

Q5: Do you have any instruction for software installation?
A7: Yes. There is the software installation video on our website. There is the software installation manual in the package too. You can follow them to install the software. Attention: Nissan consult software must be installed on XP system.

Q6: Can i use your nissan consult 3 to program tcm and bcm?
A8: This nissan consult 3 plus support this two function. But if you want to use this two function, you need have the programming file by yourself.

WOYO PDR007 Paintless Dent Repair For Steel

WOYO PDR-007 Professional Dent Repair Tool Auto Sheet Metal Tool Set Car Body Repair For Iron Car Body Remove Dents

The WOYO PDR007 is a mobile, handheld magnetic induction unit designed for paintless dent removal from panels using rapid, focused heating induction.
Unit can also be used to shrink stretched metal.
Fast to repair and easy to use are the biggest advantages of it.
The unit has several settings that can be adjusted depending on its application.

Problem:

1. How does it work? (What is the theory?)

Unlike traditional PDR, WOYO PDR uses magnetic induction heating and releases the dent tension, then absorbs the concave part, and finally restores to the original state.

2. What is the difference between WOYO PDR and traditional dent removal tools?

Free disassembly

Traditional repair tools use hooks to extend into the inside of the sheet metal and then pull down the dents. It may be necessary to remove car doors or windows.

However, WOYO PDR can work directly on the dent part.

Greatly improved efficiency

WOYO PDR may take 30 seconds to 3 minutes.

Traditional repair tools require at least 30 minutes. Except the spray should last for 24 hours

Exquisite workmanship

After WOYO PDR, the dent part is smooth. Traditional repair tools may leave some small obstacles.

What kind of teeth can be repaired

3. Scope of adaptation

This device is used to smooth dents, as shown in the linked picture:

Non-adaptive range:

Dead end dent

PDR007 is not suitable for aluminum body

4. Which part of the body can be repaired?

Main Characters:

1. WOYO PDR007 is easy to use, any worker with a background in metal composition can master it in three minutes.
2. WOYO PDR007 can fix soft dents on metal surfaces in only 30 seconds.
3. Rapidly recoup investment. In one case, a customer was able to recoup their investment after repaired six cars.
4. Features a large display screen for precise control and monitoring progress in real-time.
5. Application: soft dent, the more closer to the central parts, the easier the dent be repaired.
6. Certificate CE FCC ROHS PSE
7. Repair method: With rapid, focused heating induction on the dent surrounding via the repair handle, the dent then stretched and repaired by itself.

8. Time control mode: Repair dark color dent suggested.

The working time can be preset while the power is fixed at 100%, meaning if you want to heat for example 0.5 sec, then you can preset this time and it will stop working after the set time.

The time setting range from 0.5 sec to 4 sec.

This can be helpful in the dent removal application to avoid burning the dent.

We also added an extra dial “MAX”to extend the working time as you want.

9. Power control mode: Repair light color dent suggested.

The power can be preset from 20% to 100%.

Using the power control mode, the working time can be adjusted by ON/OFF on the repair handle.

Accessory List:

1 * PDR Main
1 * Main Cable(1.8M)
1 * Power Cable(1.5M)
1 * Repair Handle
1 * Instruction Manual
1 * Pump
1 * Lamp

Nissan Consult 3 Plus Diagnos Read DTCs for Infiniti FX3545 2003

This article show a guide on how to use Nissan Consult 3 Plus to diagnose/read trouble codes for Infiniti FX35/FX45 2003.

Preparations:

Nissan Consult 3 Plus Software Download

How to Install Nissan Consult 3 Plus Software

Nissan Consult 3 Plus Interface

Diagnosis Procedures:

1.Open “CONSULTIII” on the desktop.

2.A window pops up reading “There is no registered VI/MI. Please contact your administrator.” Click “OK”.

3.Click “Sub mode”

4.Click “Administrator Menu” on the left menu list.

5.Please input password… “nissanconsult3”, then click “OK”.

6.Click “VIMI Registration”

7.Input “VI serial Number” and then click “Set”.

8.You can see the VI serial number under “VI list”

9.Detected VI list, click “Connect”.

10.Checking the firmware version.

11.Select Vehicle Name and Model Year, then click “Select”.

12.Click “Confirm” to confirm the information: Market Code, Area Code, Country Code, Vehicle Name and Model Year.

13.Select System.

14.Select Diagnosis

15.Read out trouble codes.

Now it show the diagnostic trouble code as below,and you need to check the problem according to the DTCs,after then clear them.

JPRO Professional Heavy Truck Diagnostic Scanner Tool new information

JPRO is the one in-shop diagnostic and repair solution used by today’s major fleets and service centers. Offering the most extensive multi-brand coverage and comprehensive diagnostics, JPRO Professional Diagnostic Tool gives you an unparalleled look into the vehicles you repair daily. Use JPRO’s advanced capabilities to detect every issue on the vehicle, resulting in more efficient technicians and improved profits.

With JPRO Professional, technicians at companies ranging from the largest fleet maintenance centers to independent repair businesses can quickly take advantage of our easy-to-use technology to connect to and read the results of an entire vehicle’s systems in about a minute’s time.

This comprehensive readout includes access to the following areas and functions of a vehicle:
Engine controller
Transmission controller
Anti-lock brakes
Exhaust aftertreatment
Body controller
Instrument cluster
Equipped with comprehensive vehicle overviews, your technicians will become far more efficient at diagnosing issues across all makes and models of classes 3 to 8 commercial vehicles. What’s more: They can be confident that they won’t miss minor problems that, if overlooked, could lead to major repairs down the road.

Stop crawling around the vehicle to identify OEM components and diagnose vehicles-let JPRO do the work for you!

Industry-Leading Commercial Vehicle Diagnostic Software
JPRO Professional will scan the entire vehicle, providing detailed component information and enhanced fault code descriptions so you can diagnose faster than ever. Loaded with industry-leading bi-directional capabilities, JPRO will reduce your dependency on hard-to-use OEM software and empower you to do what you do best – repair vehicles.

The Number One Comprehensive Heavy-Duty Truck Diagnostic Scanner
In addition to time savings, JPRO offers access to data you need so that you’re not left scratching your head with a vehicle that’s not included in a lesser diesel diagnostic tool’s database.

With Heavy Duty Diagnostic JPRO as your comprehensive heavy-duty diagnostic solution, you can easily perform scans and repairs on the following makes of commercial vehicles, engines, and transmissions:

Bodies and chassis: Able to scan the bodies and chassis of Bluebird, Ford, Freightliner, GM International, Kenworth, Peterbilt, Mack, Sprinter, Thomas Built, Sterling, Western Star, and Volvo.
Engines: Includes coverage of CAT, Detroit, Cummins, Ford, GM International, Mercedes, PACCAR MX, Mack, Sprinter, and Volvo engines.
Transmissions: Covers Allison, Detroit, GM, Eaton, Mack, Sprinter, Volvo, Ford, and ZF transmissions.
ABS: Can read Bendix, GM, Haldex, Ford, Sprinter, WABCO, and Wabash anti-lock brake systems.

JPRO Heavy Duty Dignostic Tool Includes:
1.Software on DVD-ROM with Keygen and Drivers
2.JPRO DLA+ 2.0 Adapter Cable
3.Heavy-Duty Vehicle Cables (6-pin, 9-pin, OBD-II Type-B cable for Mack & Volvo)
4.Medium-Duty Type-B OBDII Cables (Ford, GM, Sprinter/Hino/Isuzu, Mack & Volvo)
5.USB Cable