US$4,399.00 – Original DSPIII+ DSP3+ Odometer Correction Tool Hot Sale

Original DSPIII+ DSP3+ Odometer Correction Tool Full Package Include All Software And Hardware

DSP3+ Odometer TOOL Introduction

Original DSPIII+ full package (include all software and hardware)Free 2021 update with DSP3+ Full version!Adjusting kilometers with DSP3+Popular milage programmerAdvanced device programmerConversion from Miles to KilometersMotorola device programmerEEPROM device programmer The most advanced odometer adjustment tool for professionalsThe most complete version to cover odometer mileage adjustment, airbag reset, some immobilizer programming and radio decoding.

Details : http://www.smelecom.com/sm/download.htm

The best odometer repair equipment DSP3+
1.Full touch screen
2.One button upgrade
3.Real time data interaction with PC via USB
4.World top R & D team, professional after-sales group to service
5.98% coverage rate for digital odometer, airbag modules, car radios,car immobilizers
6.Simple and clear operation interface

DSP3+ Odometer TOOL full package (include all software and hardware)
Free 2021 update with DSP3+ Full version!
Adjusting kilometers with DSP3+
Popular milage programmer
Advanced device programmer
Conversion from Miles to Kilometers
Motorola device programmer
EEPROM device programmer

The most advanced odometer adjustment tool for professionals
The most complete version to cover odometer mileage adjustment, airbag reset, some immobilizer programming and radio decoding. No limitation on odometer software! Can be used as stand along device programmer to access any EEPROM and MCU found in automotive industry these days.

Software:
“Full software” includes FULL ODOMETER and some AIRBAG/RADIO/ IMMO coverage using OBD2 and direct programming of EEPROMs and MCUs. For complete coverage advice with “Vehicle List” below.

Hardware:
PDA main unit. Includes the full set of all available adapters: EEPROM, Motorola, NEC, TMS 374, HC711, HC908, 9(S)12 in-circuit, HC705, EWS, NDM457, ST624, TMS 370, CMM, OBD, JC, AVR/PIC, D80/160, Multiplex, C-04, Denso. Includes all connectors and clips: MERCEDES-38 connector, BWM-20 connector, BMW CAS cables, Mercedes cluster cable, FCA chrysler cable, SD card, WiFi adapter, SOIC8 clip, touch-holders (T-01, T-02, T-03, T-04), USB cable, power cables.

DSP III Full Package content:

– PDA main unit, with full software authorization
ACESSORY ：
1.MAIN CABLE
2.POWER CABLE
3.USB CABLE
4.FCA12+8 CONNECTOR
5.14PINOUT * 2
6.8PINOUT * 2
7.EEPROM PCB * 2
8.SOIC CLIP
9.TOUCH HOLDER * 4(T-01,T-02,T-03,T-04)
10.BMW CAS CONNECTOR * 2(C-02,C-03)
11.BENZ ODOMETER CONNECTOR(C-01)
12.908 SOCKETS * 2
13.711 SOCKETS * 8
14.705 SOCKET
15.TMS SOCKET
16.NDM457 SOCKET
17.99 CHEROKEE
18.TEST CONNECTOR
19.WIRELESS USB ADAPTER
Adapters:
1.EEPROM Adapter
2.MOTOROLA Adapter
3.HCS12 IN-CIRCUIT Adapter
4.EWS Adapter
5.TMS374 Adapter
6.NEC Adapter
7.TMS Adapter
8.ST624X Adapter
9.NDM457 Adapter
10.HC08 Adapter
11.HC(7)11 Adapter
12.705 Adapter
13.CMM Adapter
14.OBD Adapter
15.JC Adapter
16.M35080 Adapter
17.D80/160 Adapter
18.MULTIPLEX Adapter
19.DENSO Adapter(T-05,T-06)

How to connect with internet ?

For more information about Car Odometer ,please visit our website [e-mail]

The Super DSPIII Odometer Correction Tool Mileage Programmer fully supports newest high-end Car

Super DSPIII DSP3 Plus Odometer Correction Tool for AUDI/VW/ SKODA/SEAT/BENTLE/MERCEDES/LAND ROVER/JAGUAR/VOLVO/PORSCHE 2010-2018

Super DSPIII Odometer Correction Tool Super DSP3 Mileage Programmer fully supports newest high-end Car

Notice : This tool no need register , the password is 123456

Super DSPIII work for AUDI/VW/ SKODA/SEAT/BENTLE/MERCEDES/ JLR/ VOLVO/ PORSCHE 2010-2017 years of models Mileage Programming via OBD adapters.

Introduction：
super dspiii is the most complete programming device for digital odometers,  It is a high-quality embeded system, which offers a maximum of flexibility and working comfort.

Technical reference：

1.Powered by industrial grade core board with Freescale i.MX28x processor, speeds up to 650MHZ, 800*480 TFT LCD and touch screen(7.0″.16:9). Convenient keyset. USB host and USB device. SD card interface. 128MB NandFlash, 128MB DDRII.

2.We use industrial grade components to ensure the stability and reliability under a wide temperature range, from -40℃ to +85℃.

3.Whole machine passed EMC industry 4 grade quality assurance and durable performance, the product stability greatly improved.

4.The Wince6.0 operating system can ensure the software platform reliability and compatibility.

5.Self-check function integrated in system.

Enhanced OBD functions, including CAN-BUS / J1850 / CCD-BUS / ISO9141 / SPI protocols.

6.Intuitive operability by full menu and picture guidance. All data can be edited, stored and loaded.

7.Color connection picture is on the screen whenever you need.

The stored data can be transferred to a PC by USB port or SD card, and also can be transfer to wherever you want directly by internet.

Super DSP3 full odometer: AUDI/VW/ SKODA/SEAT/BENTLE/MERCEDES/ LAND ROVER/ JAGUAR/ VOLVO/ PORSCHE

For more information about Mileage Correction Tool ,please visit our website [e-mail]

Firmware Flash on CAT Comm Adapter 3 CAT Caterpillar ET Diagnostic Adapter III

Cat et Caterpillar Electronic Technician Software:
Brand: Caterpillar
Region: WorldWide
Support Multi-language：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Support All cars of CAT

2021A is an upgraded version of 2020C , A represents the first quarter, and C is the software updated in the third quarter.

2021A Cat ET software as Cat Caterpillar ET 2018C 2019A 2019C 2020C Software update version, 2021A Caterpillar Electronic Technician software With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2021.

Best Quality 2021A CAT Caterpillar ET Diagnostic Adapter III：

Update the firmware:
1)Connect CAT Comm Adapter 3 (CA3) to Diagnostic Port on the Engine (Key switch: ON).
2)Open CAT Communication Adapter 3 Toolkit

3)Select the middle Application Firmware Flash icon button which displays the options for firmware upgrades, or through Utilities – Reprogram CA3 menu.

4)Select a file to flash by clicking Select File, browse to (default: Program Files/ Program Files x86 – Caterpillar Inc – Comm Adapter 3 – Firmware) and select the file.

5)Click Open.

6) Click Begin to send the file. Files of the type “.bz2” for example, “CA3_1.23.54.tar.bz2”.

7)The file transfer takes approximately 2 minutes, at which point the following
dialog box with the following message will display: “The file transfer was successful. Please wait while the CA3 is reprogrammed and then resets”. Click OK.

8)The CA3 Display Indicator Lights flashes in sequence while the new firmware is installed. When the installation is complete, the lights stop flashing. The entire transfer and installation process takes less than 4 minutes.

9)Click the Exit icon button on the right to exit the Toolkit.

For more information about Professional Diagnostic Tools ,please visit our website [e-mail]

PIWIS III with Piwis 3 Software Details

 The Porsche PIWIS 3 (PST3) Tester III Diagnostic Tool :
1. Exclusive support for P0rsche third generation diagnostic PIWIS 3
2. New DoIP Ethernet diagnostic technology
3. Luxury car diagnosis, ultra low threshold
4. Support Porsche Models after 1996.
Update method : Send SSD back or buy a new SSD

PIWIS III with Piwis 3 Software Details:
1.Piwis tester 3 With Two Version System Software
(1) V39.900(with Engineering software support online programming)
(2) V38.200(with Engineering software support offline programming)
2.Update: Send Laptop with SSD back to upgrade, 1 year for free, after one year, 100usd/time

3.Support Multi-Languages: German, English, US English, French, Italian, Spanish, Japanese, Chinese, Russia, Portuguese, Nederlands 

4.Vehicles Coverage: Support all Porsch till Nowaday

Porsche PIWIS TESTER PIWIS3 Features & Functions :
1. New operating system and more intuitive software interface
2. New VCI, support for models with DoIP diagnostics after 2017
3. Maintenance, repair, control unit replacement, programming code
4. Login online anti-theft matching programming
5. Guided fault finding
6. Maintenance circuit diagram view
7. Engineer mode (development version) can support special functions such as installing, modify, Flash.

Porsche Tester III Software details :

 

This is hardware with software, if you need Piwis iii with laptop complete ready to use, please click: https://www.cnautotool.com/goods-6976-Porsche-Tester-III-Diagnostic-Tool-Piwis-3-Software-Installed-Laptop.html 

How to perform pairing in the Piwis tester 3 software for Porsche PT3G VCI

The Porsche PIWIS 3 is the newest Diagnostic Tool in the market. It can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs.

1.Piwis 3 With V39.900 Piwis III Software for Porsch Cars diagnostic & Programming.
2.Piwis 3 with developer mode software & TeamViewer Installed Lenovo Laptop Ready To Use, cover all piwis 2 functions.
3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 2002.

Power-on password ：123456

Notice:
1. The SSD cannot be copied.
2. Piwis 3 Software SSD can ONLY use as internal disk, NEVER use as external hard drive, otherwise it will be useless and damage the SSD.
We don’t provide after sale service once the SSD used as external hard drive.
3. Laptop Specs Requirements: MUST be high-resolution PC, or the software cannot show completely.（1920*1080 resolution memory 8G I5CPU）
We standard package with laptop comes with Lenovo Yoga S1 i5 8G laptop is recommended.

4. This is hardware with software, if you need Piwis iii with laptop complete ready to use, please click: https://www.cnautotool.com/goods-6976-Porsche-Tester-III-Diagnostic-Tool-Piwis-3-Software-Installed-Laptop.html

PIWIS III with Piwis 3 Software Details:
1.Piwis tester 3 With Two Version System Software
(1) V39.900(with Engineering software support online programming)
(2) V38.200(with Engineering software support offline programming)
2.Update: Send Laptop with SSD back to upgrade, 1 year for free, after one year, 100usd/time

3.Support Multi-Languages: German, English, US English, French, Italian, Spanish, Japanese, Chinese, Russia, Portuguese, Nederlands

4.Vehicles Coverage: Support all Porsch till Nowaday
Piwis III Supports New & Old Cars:
All Porsche from 1996-2020:
1.Porsche 911(997) (991)
2.Boxster/Cayman (987)
3.Cayenne up to MY 2010
4.Cayenne from MY 2011
5.Panamera

Especially the latest models:
1.Paramera (971) 2020
2.Caynenne (92A) 2020
3.Macan (95B) 2020
4.911 (991) 2020

Also support All Other Old car models

Porsche PIWIS TESTER PIWIS3 Features & Functions :
1. New operating system and more intuitive software interface
2. New VCI, support for models with DoIP diagnostics after 2017
3. Maintenance, repair, control unit replacement, programming code
4. Login online anti-theft matching programming
5. Guided fault finding
6. Maintenance circuit diagram view
7. Engineer mode (development version) can support special functions such as installing, modify, Flash.

How to perform pairing in the Piwis tester 3 software for Porsche PT3G VCI?

1.Connect Porsche PC and PT3G VCI

2.VCI configuration;


3.Perform pairing finish,setting WLAN Diagnostics.

For more information about Car Diagnostic Tools,please visit our website [e-mail]